|
All Plugins:
| Show 10 Most Recent | Show 50 Most Recent | Show 100 Most Recent | Search Plugins |
| Show Most Popular | Show My PWNED! Plugs | Effects:
| Show All Effects |
| Amplifier | Analyzer | Compressor | DeEsser | Delay | Distortion |
| EQ | FFT | Filter | Gate | Granular | Modulation |
| Multi | Other | Pitch Shifter | Reverb | Spatializer | Instruments:
| Show All Instruments |
| Ambience | Analog | Bass | Beat Slicer | Chip/LoTech | Drum |
| Frequency Modulation | Granular | Other | Phase Distortion | Physical Modeling | Sample Based | |
|
|
A recent forum post by serezha.polunin:
Проблема возникла с волосами, ред...
Read More... |
| |
 Audiovibrato is for those of you who love the sound of vibrato, but find yourselves in a sticky situation where your audio has none.
You can either control the rate manually, or click the "sync" button and have the rate lock to a sync controlled by your bpm clock. |
| PWNED! By: blatanville, MarsHottentot, Moseph |
|
| |
 A simple Barberpole flanger implementation. |
| PWNED! By: blatanville |
|
| |
 Have you ever used a stereo chorus on a bass sound and ended up with a muddy bottom end swimming all over the place?
Bass Chorus can avoid that problem by separating the bass and treble frequencies, where you set the cutoff frequency. The effect is only applied to the treble portion, which is then mixed back with the bass for output. |
| PWNED! By: blatanville, synthgeek |
|
| |
 Have you ever used a phaser on a bass track and ended up with a floppy bottom end wobbling all over the place?
Bass Phaser can avoid that problem by separating the bass and treble frequencies, where you set the cutoff frequency. The effect is only applied to the treble portion, which is then mixed back with the bass for output. |
| PWNED! By: blatanville, MarsHottentot, synthgeek |
|
| |
 The Chorus effect was originally designed to simulate several voices: just as if several persons were playing together the same notes but with a variable delay between them. This is the effect you get with Blue Cat's Chorus when setting the rate parameter to a small value. But this plug-in also enables you to drastically change your sound and produce strange pitch modulation or crazy 'bubbles' effects. Just check the factory presets to get convinced by the quality and versatility of Blue Cat's Chorus.
|
| PWNED! By: blatanville, MarsHottentot, MIDIManNI, nathel |
|
| |
 Blue Cat's Flanger effect is very versatile: it may sound very harsh and metallic or on the contrary very soft. You can obtain a wide range of sounds with this plug-in. The included factory presets will make you explore the capabilities of this effect.
Very famous during the 70's and 80's, this plug-in can be used on almost any audio track: from drums to voices or guitars, from a subtle effect to a deep alien-like voice effect, enjoy it!
This effect is a mono effect: it will alter the sound the same way on the left and right channels of your audio signal. |
| PWNED! By: blatanville, MIDIManNI |
|
| |
 Modeled after vintage analog phaser circuits, Blue Cat's Phaser reproduces this old vintage phasing effect that you can find on so many recordings, but with the precision of modern digital processing techniques. You can choose to apply up to 32 phasing stages, pushing the modelisation to its limits, or create a subtle phasing effect with wet and feedback parameters set to a few percents. |
| PWNED! By: blatanville, MIDIManNI |
|
| |
 Based on Blue Cat's Chorus technology, Blue Cat's Stereo Chorus has the same versatility and crystal-clear sounding capabilities as its little brother, plus a subtle to very deep stereo effect feature: just play with the 'stereo' control and get this famous widening stereo chorus effect. You will feel like the sound is turning around your head. |
| PWNED! By: blatanville, MIDIManNI, West, nathel |
|
| |
 Using the same algorithm as our Flanger, this plug-in adds a unique feature to the original effect: you can smoothly transform it into a stereo flanging effect with a single slider. Push the 'stereo' slider of the user interface and hear the difference: the effect is turning around you head and the sound takes another dimension.
Simple yet powerful, this feature benefits from the Smooth Update mechanism, and thus does not introduce any 'plop' when you modify the parameters, on both DirectX and VST platforms. |
| PWNED! By: blatanville, MarsHottentot, MIDIManNI, nathel |
|
| |
 BRB-AudioFM modulates the frequency of incoming audio. It simply uses a pair of delay modules linked to a series of LFO's to effectivey speed up and slow down any incoming signal. |
| PWNED! By: blatanville, MarsHottentot |
|
| |
 Charsiesis, a chorus / delay / wackiness effect - the concept is that several delayed copies of the signal are summed together, with each delay length changing at a random rate that is regenerated periodically. |
| PWNED! By: blatanville, skinless, martygras, shamanix, synthgeek |
|
| |
 This original chorus effect offers a high quality modulation engine, and many other original features: one of these is the practical user interface, which allows the user to obtain thousands of different sound configurations. |
| PWNED! By: blatanville, skinless, Moseph, BroderYon |
|
| |
 This is a standalone version of the chorus implemented in U-NO-60.
* Characteristics of the Juno-60 chorus
* 2 modes
* Dry/wet adjustable
* Volume knob
* Low CPU |
| PWNED! By: blatanville, BroderYon, shamanix |
|
| |
 A simple chorus effect. |
|
| |
 a nice phase modulation
plug-in. |
|
| |
 Classic Chorus is a great sounding and easy to use classical Chorus VST plugin. Nice Plugin for adding Depth, Fatness and Stereo perspective to almost any Electrical Instruments or Vocal. |
| PWNED! By: , blatanville, pattonfreak1, robojam, MIDIManNI, West, nathel, martygras, Moseph, BroderYon, duckett, synthgeek, exi |
|
| |
 Take a trip back to the mid 80's with our Classic Flanger. It will give you that subtle or massive swirling effect that is used mainly for guitar, but can be used for many other instruments as well. Due to a tightly controlled feedback path, it is possible to boost the flanging effect to maximum without getting unwanted side effects. |
| PWNED! By: , blatanville, pattonfreak1, robojam, MIDIManNI, West, martygras, Moseph, BroderYon, duckett, shamanix, synthgeek, exi |
|
| |
 The Classic Phaser emulates analog phasers from the 70’s and 80’s. These vintage phasers got their characteristic sound from the analog phase shifting filters used, unlike the delay lines used in most modern digital phasers. To get a deeper and fatter phasing effect, more filter stages were cascaded. The Classic Phaser works just like an analog phaser, and with selectable filter stages from 4 to 12, it can resemble anything from phaser pedals to expensive studio phasers from that time period. |
| PWNED! By: , blatanville, pattonfreak1, robojam, MIDIManNI, West, martygras, Moseph, BroderYon, duckett, shamanix, synthgeek, exi |
|
| |
 The Cobalt Chorus is based on the chorus effect in the Cobalt VSTi synthesizer. It is capable of creating traditional chorus effects as well as flanging and vibrato. Its quadrature LFO enhances the stereo output by modulating the left and right channels 90 degrees out of phase with each other. Also, you can control the modulation depth in realtime with the modulation wheel.
Key Features
Delay time from 1 to 25 milliseconds
"Quad" LFO modulation for enhanced stereo sound
Modulation wheel can be routed to control the LFO's modulation depth
Feedback for creating flange effects
Kore 2 user page/patch files included |
| PWNED! By: , blatanville |
|
| |
 daeChorus is a pretty typical stereo chorus.
Features Hi-Pass + Low-Pass filters, your typical LFO shapes to choose from, and a neat unique bonus that lets you phase-modulate the chorus LFO with a second oscillator.
It's very easy on the CPU usage. |
|
| |
 Inspired in the effect with the same name of the EMU e6400 Ultra hardware sampler, this is not an emulation but an original and unique effect. In fact, it´s the only distorted chorus plugin available today! I was using it exclusively until now! Use it to warm, wide or even sick guitars, synths, voices and bass. This effect really works best on lo-fi, grungy or distorted and/or saturated sounds (listen to the provided demo). It sounds terrible on pads and other clean sounds. On distorted basses, it provides a simple (old school) way of getting phase distortion. Full automation! This plugin is released to show the sound of my upcoming exclusive FX plugin pack. |
|
| |
 Flang-3R is a free 6 band stereo flanger effect, You have control over the modulation with the standard osc shapes and Sample and Hold also. Theres feedback which brings out the sound more and dampening and mix if you want just a slight effect and shift to adjust the tone. Theres 3 different modes for the speed controls and you can sync the modulation, use linked control amounts or adjust the left and right separately. |
| PWNED! By: blatanville |
|
| |
 Flanger effect. |
|
| |
 It’s a random stereo flanging VST effect. The randomization is tempo-synced: delay and feedback parameters are selected independently for the left and right channels at intervals ranging from 1/64 of a beat to four bars. |
| PWNED! By: blatanville, synthgeek |
|
| |
 The FlangerHand plug-in is based on the idea of early flanging effect realised on a setup of up to 4 tape machines (1 source, 3 recorders) in the 60's.
The playback-head output from two recorders was mixed together onto a third recorder.
The "flange" effect originated when an engineer would literally put a finger on the flange, or rim of one of the tape reels so that the machine was slowed down, slipping out of sync by tiny degrees
A listener would hear a "drainpipe" sweeping effect as shifting sum-and-difference harmonics were created. When the operator removed his finger the tape sped up again, making the effect sweep back in the other direction. This is where the FlangerHand takes the flanging back in the days of tape recorders and enhances it with new fresh features. |
| PWNED! By: blatanville |
|
| |
 phaser/chorus type effect |
| PWNED! By: blatanville |
|
| |
 GChorus is a chorus effect. The incoming signal is mixed with a delayed copy of itself. The effect is created by modulating the playback speed of the delayed copy.
GChorus uses a sinusoidal LFO to vary the playback speed of the delayed signal. The magnitude and rate of this LFO are set using the Depth and Freq parameters.
When GChorus is used on a stereo signal, a separate LFO is used for each channel. The R Phase parameter controls the phase of the right-channel LFO relative to the left. When R Phase is 0°, the two LFOs are synchronised. Changing the R Phase parameter causes the two LFOs to oscillate independently, which adds width to the sound. |
| PWNED! By: blatanville, MIDIManNI, Moseph |
|
| |
 GlitchTek Ring Modulator |
| PWNED! By: khim |
|
| |
 Ambient chorus / enhancer / stereo expander |
| PWNED! By: blatanville |
|
| |
 Hues Luxe
Vibrato effect |
| PWNED! By: blatanville |
|
| |
 Hula is a dual phaser. It can produce very interesting stereo-effects.
Unlike most stereo-phasers it doesn't pan back & forth, but each channel has it's own phaser.
There's also an optional lowpass-filter at the end, to smooth out the highs. |
| PWNED! By: blatanville, zlobak |
|
| |
 The iSPINNER is a VST Rotary Speaker Simulation. It simulates the famous Leslie Speaker but with some differences.
General Features:
* One-Band Rotary Chorus
* Adjustable Overdrive
* Adjustable Rotator Off/On, Slow/Fast, Speed, Depth and Spread
* Vintage Look GUI
* Low CPU consumption
|
| PWNED! By: blatanville |
|
| |
 Up to 8 chorus voices |
| PWNED! By: blatanville |
|
| |
 The Juicer produces an effect that the ear hears as a complex of phasing, stereo pans, echo and chorus, occassionally
coming together into a massive phase effect, yet without clouding the harmonic information the way echoes do.
There are six independent band-pass filters, three per stereo channel, each with independent low
frequency modulation, and a sample and hold unit for scintillation. |
|
| |
 Chorus Effect. |
|
| |
 Killerringer is a free VST plugin, a ring modulator with variable LFO oscillators. |
|
| |
 kitchen sync is a tempo synced LFO that modulates 4 functions
- filter
- flanger
- volume
- panning
The LFO is highly configurable, you can change the waveform, the cycle length in beats, the amplitude and the y offset
You can link any/all of the filter cutoff, flanger amount, volume and panning to the LFO to give a variety of tempo synced effects to your audio |
| PWNED! By: blatanville |
|
| |
 KR-Chorus features:
* Uses High Quality interpolated delays.
* Dual LFO's, Rate adjustment from 0.1 to 6Hz and 0.17 to 10.2Hz
* Adjustable LFO depth from 0 to 100%
* Dry/Wet Mix adjustment
* Output adjustment from -20 to +6db.
* Host Sampling Frequency up to 96Khz.
* For Microsoft Windows OS (VST) suitable for all Pentium CPUs.
* Support for User definable presets (Save & Load) via Host interface.
|
| PWNED! By: blatanville, nathel |
|
| |
 KR-Flanger features:
* Uses High Quality interpolated delays.
* Adjustable rate frequency from 0.5 to 7Hz
* Adjustable LFO depth from 0 to 100%
* Dry/Wet Mix adjustment
* Output adjustment from -20 to +6db.
* Host Sampling Frequency up to 96Khz.
* For Microsoft Windows OS (VST) suitable for all Pentium CPUs.
* Support for User definable presets (Save & Load) via Host interface.
|
| PWNED! By: blatanville, nathel |
|
| |
 KR-Phaser features:
* Adjustable Rate from 0.1 to 5Hz
* Adjustable Depth from 0 to 100%
* Feedback control from 0 to 100%
* Center frequency adjustment.
* Dry/Wet Mix adjustment.
* Output adjustment from -20dB to +6dB
* Host Sampling Frequency up to 96KHz
* For Microsoft Windows OS (VST) suitable for all Pentium CPUs
* Support for User definable presets (Save & Load) via Host interface
|
| PWNED! By: blatanville |
|
| |
 Linear Phasor is the perfect marriage of vintage analogue equipment to the perfections of modern Digital Signal Processing.
Specially developed algorithms calculate the changing features a cascaded allpass network, as the LFO sweeps the selected frequency range, guaranteeing a perfectly flat response with none of the unfortunate sound-colouring associated with analogue technology.
It features:
> a 2-36 stage allpass filter cascade
> a user-definable frequency range for sweeping
[Note: For reasons of purity in emulation, the LFO is free running - like the Titanic, it is unsyncable.]
> a bypass control for A/B comparason
> a unique 'PhasoMeter' to ensure that the input and output signals in perfect phase with each other. Any inconsistencies are highlighted in red.
Never again need you worry about degrading the quality of your audio when using classic retro-emulations! |
|
| |
 magnetwall is a very simple chorus effect like "JC".
Besides for the guitar track, magnetwall is usable plugin for the various sources.
caution : version nT2 is announce only |
| PWNED! By: rebortbst |
|
| |
 This is "another flanger" with the particularity that the LFO is synchronizable to the tempo with different waveforms (triangle, sin, square, triangle exponential, random...) and a smoothing factor for the waveform, so that you can achieve some new effects not available on classical flangers. |
| PWNED! By: PTV, blatanville, Moseph, duckett, shamanix |
|
| |
 FEATURES:
- BPM Sync
- Retrigger via piano roll
to downlad you have to register or login
|
|
| |
 Wah plugin with variable tone (peak). The frequency can be controlled by any midi controller (1-127). Can operate in true stereo. Hello wah drums, or anything else that's inconvenient to run through a wah pedal! |
|
| |
 MonstaChorus - is a true analog style stereo chorus effect with a simple set of controls and fantastic sound quality. It features the usual depth and speed controls, plus a mixture knob to control the ratio of original to effected signal. Astute musicians will also notice that 2 of the knobs go to
13, a clear difference of “3” more points of quality compared to other plugins! |
| PWNED! By: PTV, blatanville, pattonfreak1, martygras |
|
| |
 The "multibandringmod I" is a multiple ring modulator based on frequency selection.
It selects from the signal 4 frequency bands - Low; Middle Low; Middle High; High. Each band is modulated by the signal generated by the sum of the other three bands. Due to its structure it works better with complex sounds, e.g. drones.
Features:
* 4 selectable frequency ranges: Low band (250/500 Hz) - Middle-Low Band (500/2000 Hz) Middle-High Band. (2000/8000 Hz) High band (7000/16000 Hz).
* Selective ringmodulation source for each band.
* Additional gain for each band.
* Mute-solo-bypass for each band for better control of the ringmodulation process.
* Main Wet/Dry & gain controls.
* Midi Learn (Please note that in SE edition you can automate and also customize parameters of only Low and Mid-low bands).
|
|
| |
 A cool phaser with a kickass GUI.
free version of the "NXTPhase Enterprise Edition - a phaser with an attitude and then some".
* Classic GUI by kvr member amoebe
* 4 to 24 stages (by fours)
* LFO range from 0.01Hz to 10Hz
* PC-based VST hosts only
* Free Download |
| PWNED! By: blatanville, martygras, duckett |
|
| |
 Pan-Oh!-Rama is a 6-stage modulation effect using multiple waveform LFO's with FM routing and smoothing. It also uses two filterbanks offering 2p/4p LP, 2p/4p HP, 2p BP and 2p BR filters. Pan-Oh!-Rama can either be run tempo synced to the host application or with a manual tempo setting. The LFO's can be gate trigged allowing the LFO's to be restarted by a note-on MIDI message. |
| PWNED! By: blatanville, aymat, exi |
|
| |
 Phaser. |
|
| |
 Simple Phaser plugin.
|
| PWNED! By: blatanville |
|
| |
 A fairly straightforward phaser effect. |
| PWNED! By: blatanville |
|
| |
 A simple phase shifter. |
|
| |
 Psycho-Phaser is a VST-plugIn for phasing effects. This effect arises, when sending the input signal through a chain of allpass-filters and mixing that filtered signal with the original signal. An allpass-filters lets all frqeuencies pass without any attenuation or amplification, but introduces a frequency-dependent phase-shift. When the filtered signal is mixed with the original signal, there will be notches in the frequency-content of the resulting signal at all frequencies at which the phase-shift in the filtered signal is some odd integer multiple of 180 degrees. In contrast to a flanger, these notches are not distributed at integer multiples of some fundamental frequency along the frequency axis - so they have no harmonic relationship. This is the most distinguishing feature between phasers and flangers (which are often regarded as somehow similar). If the characteristic frequencies of the allpass-filters are modulated over time (via an LFO), these notches slide back and forth on the frequency axis - this is phasing. Psycho-Phaser provides two independent allpass-chains for left and right channel, each of which with its own, tempo-synchronized LFO. |
|
| |
 PulseModulator is a model of an extremely rare (and exceedingly strange) tremolo pedal from the 70s. Three LFOs effect the VCA at the same time, and the whole mess goes through a distortion circuit, resulting in strange... uh... modulating pulses of sound.
We've added tempo sync to the individual LFOs to make it more useful in a modern DAW environment, but otherwise left it pretty much as-is.
Controls:
Pulse Speed: These three knobs control the rate of the individual LFOs. If the sync switch for an LFO is engaged (the "1", "2", and "3" switches on the bottom) that LFO will be synchronized to host tempo and the knob will select different tempo divisions.
Pulse Depth: Perhaps unsurprisingly, these three knobs control the depth of the individual LFOs. That is to say, they control how much each LFO affects the dry signal.
Boost Amount: This is labelled as it is on the real pedal. However, the label implies a boost circuit, but in fact it was more of a fuzz. We've modeled it as a fuzz but called it "Boost" as well.
Pulse Shape: This controls the waveshape of all three LFOs. |
| PWNED! By: PTV, blatanville, shamanix |
|
| |
 Quatropolis is a stereo chorus with four delay lines. Sound is adjustable from soft modulations to heavy detuning. This was made for the hot steampunk GUI elements of Jonathan Style. |
| PWNED! By: blatanville |
|
| |
 ring thing is a multi-flavour ring modulator, with frequency and mix level controlled by an XY pad and each axis modulated by it's own tempo-sync LFO. The modulation in both axes is shown graphically on the XY pad.
features
- 9 flavours of ring modulation, each with a different tonal quality
- 11 ring modulation waveforms
- XY pad controls modulation frequency and wet/dry mix level
- each axis can be modulated by it's own tempo-sync LFO with depth control
- 7 LFO waveforms including random
- each LFO can be damped and inverted
- graphical display of modulation on the XY pad
- LFO's can be asyncronised to add further complexity to the modulation
- all controls have midi CC and midi learn support
|
| PWNED! By: blatanville |
|
| |
 Is a Ring modulator made for work with an external microphone; oscilloscope is for compare the wave played with the sine produced internally. |
|
| |
 Rochor is inspired by a 1977 Roland chorus design. frequency divided LFO's modulate 4 delay lines. Feedback can be added for strange, robotic fx. |
| PWNED! By: blatanville, West, shamanix |
|
| |
 Multichannel Chorus :
- one input / eighteen outputs
- eighteen modulation channels
- chorus / phasing / flanger effects type
- two bidimensionnal modulators with 15 wave shapes
- shifting of the modulation values by groups of six
- activation / mute of the 18 channels |
|
| |
 Ring Modulator :
- sinusoidal wave generatore
- frequency from 0.01 Hz to 10000 Hz
- positive or negative shift |
|
| |
 SampleFlange is an audio effect somewhere between chorus and flanger. |
|
| |
 The Sanford Phaser is a VST plugin emulating a classic phase shifter. It is capable of a wide range of phase shifting sounds from subtle swirling effects to deep vibratoes. Its quadrature LFO enhances the stereo output by modulating the left and right channels 90 degrees out of phase with each other. Also, you can control the modulation depth in realtime with the modulation wheel or aftertouch.
Key Features
Up to 16 stages
"Quad" LFO modulation for enhanced stereo sound
Modulation wheel and Aftertouch can be routed to control the LFO's modulation depth
Feedback for creating deeper resonant effects
LFO speed can be synchronized to tempo |
| PWNED! By: blatanville |
|
| |
 A simple chorus implementation. |
| PWNED! By: blatanville |
|
| |
 SimpliChorus is a simple stereo chorus effect, it is also a auto pan and volume gate effect, you can adjust the rate in sync and also an independent control with fine, there is feedback and smoothing of the lfo controlling the chorus. |
| PWNED! By: rcoulombe, blatanville |
|
| |
 A simple phaser with a sound similar to a classic one. Output can be adjusted between stereo and mono. |
| PWNED! By: blatanville |
|
| |
 combines a traditional "rotary speaker" effect with a set of new possibilities and parameters, all packaged into a simple and beautiful interface. SpinBug uses phase relationships and a low freq. oscillator in order to reproduce an effect produced by Leslie speakers. |
| PWNED! By: blatanville, pattonfreak1 |
|
| |
 Two-band rotary chorus (aka "leslie simulation")
Beautiful GUI by amoebe
* Adjustable Distortion with Drive and Output level controls
* Built in Crossover at 800Hz
* Horn Filter with variable Frequency and Q Controls |
| PWNED! By: blatanville, MarsHottentot, West, Moseph, duckett |
|
| |
 Two vrek's, one for each channel.
Just like the vrek, this sounds best when used as send-effect. |
|
| |
 Stereo-Flanger is a VST-plugIn for the creation of comb-filter and flanger effects. A comb-filter delays the incoming signal by a certain amount of time and mixes the delayed signal with the original signal. Because of interference between the two signals, there will be peaks and notches in the resulting signal - peaks occur at frequencies, where the original and delayed signal are in phase, notches occur at frequenceis, where the phase bewteen the original and the delayed signal is 180° - at these frequencies, the two signals cancel out each other. The positions of these peaks and notches is determined by the delay-time and they will always have a harmonic relationship - that is: they are all integer multiples of some fundamental frequency. It is also possible to feed back the output of the delayline back to its input - this emphasizes the peaks in the spectrum. When the delaytime is modulated over time (with a LFO, for example), the peaks and notches slide back and forth on the frequncy-axis - this is flanging. Stereo-Flanger provides two LFO-modulated delaylines - one for the left and one for the right channel. |
| PWNED! By: blatanville |
|
| |
 StringChorus is a chorus that emulates the circuits used in the old string machines like Solina, Crumar or Farfisa. Get that famous, lush string sound known from Jean Michel Jarre and others with any synth which can create a simple sawtooth waveform. |
| PWNED! By: blatanville |
|
| |
 SupaPhaser is an excellent phaser plugin with a 3 to 23 stage phaser with feedback. Phaser operation is controled by a mixture of LFO and envelope follower, both configurable.
Enhanced stereo effect.
Pre-phaser distort or saturate.
|
| PWNED! By: PTV, blatanville, Moseph, BroderYon, shamanix, synthgeek, exi |
|
| |
 A simple audio-triggered envelope designed for use with electric guitars
Stereo in/out
|
|
| |
 TAL-Flanger is a easy to tweak stereo flanger effect with its own special sound and some asymmetric analog like components in the feedback corner. Useful for a wide range of flanger effects from subtle to extreme. |
| PWNED! By: blatanville, robojam, duckett |
|
| |
 TAL-Phaser is a carefully modelled stereo phaser effect. The user can choose between two, four and six stages. Its possible to adjust the lowest and highest frequency of the filter.
* Two, four and six stages.
* Syncable LFO.
* Lowest- and highest-frequency adjustable.
* Stereo phase offset from 0 to 180 degree.
* Feedback (a very small amount of second order distortion in the feedback path).
* Adjustable Dry/Wet.
* Some default presets. |
| PWNED! By: blatanville, robojam, shamanix |
|
| |
 A comprehensive modulation effect, offering 3 types of modulation of audio signals: amplitude modulation, ring modulation, and frequency modulation. There are three audio sources, all of which may be used as either the modulator signal, or the carrier signal (and in some cases, both simultaneously). Also includes a fairly comprehensive MIDI implementation. The GUI is by Tomasz Kaye, of Redshift Media. (C++) |
| PWNED! By: PTV, blatanville, BroderYon |
|
| |
 The Nomad Bundle (formerly “Free Bundle”) has been designed specifically to acknowledge and show appreciation for our registered Nomad Factory customers. Each customer that purchases any Nomad Factory product receives this set of three high-quality effects plug-ins. The Nomad Bundle includes a Nomad-Phaser, Nomad-Sweeper, and Nomad-Tremolo. But do not let the "price" fool you! These plug-ins are serious pro audio tools by Nomad Factory. This means you still get the distinctive look and incredible sound you would come to expect from any Nomad Factory product. The classic effects in the Nomad Bundle allow you to instantly expand the creative possibilities for your recordings. Designed by musicians for musicians, the Free Bundle is an essential tool for your virtual studio. |
| PWNED! By: blatanville, Moseph |
|
| |
 Tremoloid is a simple but versatile plug for creating tremolo-type effects using pure AM.
Sounds range from classic 60's tremolo to extreme FSU/glitch goodness.
Excellent for EPs, strings/pads, and guitars.
|
|
| |
 VCS UltraPhazer is a multi oscillated phaser VST plugin for Windows hosts. It sounds very cool on guitar tracks and on raw saw sound. It can also be used as stereo enhancer and auto panner. There are 14 sliders you can control, Resonance, Min Filter, Max Filter, LFO Freq, LFO Add 1-3, Filter 1-4, Num Filter, Stereo Phaz and Mix. You can also use it as multi notch filter. Windows only. |
| PWNED! By: blatanville |
|
| |
 Variable tremolo which moves between minimum and maximum speeds at user-controlled or randomized rate. |
|
| |
 A high-structured 4 voices chorus which filters every voice with a different harmonic modulation, then the tremolo section gives additional shine and sculpting possibilities using the same voicing architecture. Every parameter is fully customizable with dedicated knobs for speed and separation of chorusing, giving maximum flexibility and dramatic, smooth changes to the signal, that varies from monophonic tube-flangers to incredibly rich and detailed stereo smearings. |
| PWNED! By: blatanville |
|
| |
 This is a weird experimental lofi/delay effect. Well, actally it's a ring-modulator that uses a delay of the incomming signal as carrier frequency. Only the repeats ring-modulate your sound, so it sounds like a delay that interferes with your signal.
The one knob in the middle controls the delay time. |
|
| |
 A voice-controlled wah-wah pedal.
|
| PWNED! By: blatanville, MarsHottentot |
|
| |
 The Warmer Phaser XD-78's has been designed specifically to introduce users of the Mackie Spike Recording Package to the amazing sound and distinctive features of Nomad Factory products. Per request from Mackie Designs, we have developed an exceptional Special Edition plug-in that will put to rest all misconceptions about the harshness of digital audio processing. The incredibly warm sound of this phaser is a result of the best tube emulation available in a pro audio plug-in. The Warmer Phaser XD-78's is free for all purchasers of the Mackie Spike Recording Package. Designed by musicians for musicians, the Warmer Phaser XD-78's is an essential tool for your virtual studio. |
| PWNED! By: blatanville |
|
| |
 Wobbles is a simple vibrato plug-in featuring adjustable shape, depth and speed. Chorus and phaser type effects can also be achieved by using the dry/wet knob. |
|
| |
 Designed to take ordinary monophonic
or stereo audio input and transform it
into a wide pseudo stereo field.It also
incorparates a 4 pole lowpass filter
an LFO |
|
